Scandia is a rural Washington County township-city of approximately 4,000 residents in the far northeastern corner of the Twin Cities metro, bordering the Saint Croix River and adjacent to Forest Lake and Marine on Saint Croix. Known for its Scandinavian heritage, agricultural roots, and expansive wooded lots, Scandia has a mix of older farmhouses, hobby farms, acreage properties, and newer rural residential builds. LP (propane) is the dominant fuel source for most Scandia homes outside the limited natural gas service area. Here’s what furnace replacement costs in Scandia, MN.
Average Furnace Replacement Cost in Scandia
Scandia homeowners typically pay between $3,100 and $5,800 for a complete furnace replacement including equipment and installation. LP homeowners may see slightly higher operating costs that make efficiency upgrades especially worthwhile. Larger rural properties with more complex ductwork or older farmhouse configurations push costs toward the higher range.
Buy the same name-brand furnace the pros install — shipped factory-direct to your door. No middleman, 5-star rated, and financing available.
Factors Affecting Furnace Replacement Cost in Scandia
- LP (propane) dominance: Most Scandia properties use LP rather than natural gas. Goodman furnaces are available LP-ready or field-convertible. LP price volatility makes 96% AFUE high-efficiency equipment especially valuable — burning 15–20% less fuel significantly impacts LP costs.
- Older farmhouse and rural configurations: Scandia’s agricultural heritage means many properties have original farmhouse HVAC systems with non-standard ductwork or configurations requiring extra installation work.
- Venting modifications: Older homes with chimney-vented systems need PVC exhaust venting for high-efficiency condensing furnaces — adding $200–$500 to the project.
- Home size and rural heating loads: Scandia acreage homes often have higher heating loads due to older insulation and larger square footage. Proper BTU sizing is critical.
Best Goodman Furnaces for Scandia
- Goodman GMSS92 (92% AFUE, LP-compatible): Entry-level option for smaller Scandia properties. Straightforward LP conversion available.
- Goodman GMEC96 (96% AFUE, two-stage, LP-compatible): The top recommendation for Scandia LP homeowners. Higher efficiency directly reduces propane consumption — where LP costs $1.50–$2.50/gallon, the savings compound quickly.
- Goodman GMVC96 (96% AFUE, variable-speed): Premium choice for Scandia’s larger acreage homes or hobby farms with complex heating needs.
Why Scandia Homeowners Use Furnace Direct
Scandia’s rural location means HVAC contractors typically drive from Forest Lake or Stillwater, often adding travel time and supply-chain markup to quotes. Scandia homeowners get the same Goodman equipment at wholesale pricing, then work with their preferred local installer for labor.
When to Replace Your Scandia Furnace
- System is 15–20+ years old — very common in Scandia’s older rural properties
- LP bills significantly higher than prior years
- Heat exchanger failure or CO alarm (replace immediately)
- Inadequate heating during extended extreme cold
- Repeated service calls for same failures
Frequently Asked Questions
- How much does furnace replacement cost in Scandia, MN?
- Furnace replacement in Scandia typically costs $3,100 to $5,800 including equipment and installation. LP homes or larger rural properties with complex configurations may be at the higher end.
- Are LP furnaces available for Scandia homes?
- Yes. Goodman furnaces are LP-compatible via factory configuration or field conversion kits. LP is the primary fuel for most Scandia homes. High-efficiency 96% AFUE LP furnaces deliver the greatest savings, as they burn 15–20% less propane than 80% AFUE models.
- What furnace size does a Scandia rural property need?
- Scandia rural homes and farmhouses often require 80,000–100,000 BTU furnaces due to larger square footage and older insulation. A Manual J heat load calculation by your installer determines the correct capacity.
- How long does furnace installation take in Scandia?
- Most Scandia furnace replacements take 4–8 hours depending on home complexity and LP conversion requirements.
- Does Furnace Direct deliver to Scandia, MN?
- Yes. Factory-direct Goodman pricing eliminates the rural supply premium and contractor equipment markup.
Get your furnace replaced.
Tell us a little about your home and what you're replacing. A specialist will call you to work out exactly what you need, go over the price, and get it replaced. No obligation.