Goodman offers a full lineup of central air conditioners ranging from budget single-stage units to high-efficiency two-stage models. If you're replacing or adding central AC in Minnesota, understanding the lineup helps you balance upfront cost against long-term efficiency. At Furnace Direct, we sell Goodman AC factory-direct with same-day Minnesota delivery.
Understanding SEER2
SEER2 (Seasonal Energy Efficiency Ratio 2) replaced the original SEER rating system in 2023. It uses a slightly more stringent test condition, so SEER2 numbers are roughly 4–5% lower than equivalent old-SEER numbers. A SEER2 16 unit is approximately equivalent to an old-SEER 17 unit. Minnesota (Climate Zone 6) has a minimum efficiency requirement of SEER2 13.4 for split-system central ACs as of 2023.
Buy the same name-brand AC system the pros install — shipped factory-direct to your door. No middleman, free delivery, 5-star rated, and financing available.
Goodman AC Model Lineup
| Model | SEER2 | Stages | Best For |
|---|---|---|---|
| GSX14 / GSX16 | 14–16 SEER2 | Single-stage | Budget replacement, mild use |
| GSXH5 | 15–17 SEER2 | Single-stage | Mid-range efficiency |
| GSXC18 | 18 SEER2 | Two-stage | Efficiency + comfort |
| GSXC20 / GSX20 | 20+ SEER2 | Two-stage | Maximum efficiency |
Single-Stage vs. Two-Stage AC
A single-stage AC compressor runs at 100% capacity whenever it's on — it cycles on and off to maintain temperature. A two-stage AC runs at low capacity (typically 65–70%) for mild days and full capacity on the hottest days. Two-stage operation provides: longer run cycles that better dehumidify the air, more consistent temperature, quieter operation, and higher efficiency at part load. For Minnesota, where summer humidity can be uncomfortable even at moderate temperatures, two-stage AC's dehumidification advantage is meaningful.
GSX16: The Value Pick
The Goodman GSX16 (or similar single-stage 14–16 SEER2 models) is the most popular replacement unit for budget-conscious Minnesota homeowners. It meets efficiency minimums with headroom, is widely available, and keeps upfront cost low. For homes used seasonally or where AC runs fewer hours, it's often the right call. It pairs well with any Goodman furnace.
GSXC18: The Sweet Spot
The Goodman GSXC18 at 18 SEER2 two-stage is often the best value for Minnesota homeowners who run their AC regularly through June–August. The two-stage operation provides noticeably better humidity control and comfort compared to single-stage, and the efficiency gain pays back meaningfully over 15+ years. This is our most commonly recommended upgrade from a standard single-stage unit.
Minnesota-Specific Considerations
Minnesota's cooling season is shorter than southern states (roughly May–September), which reduces the payback period for premium SEER2 units. For most Minnesota homeowners, a well-installed GSXC18 offers the best balance of payback and comfort. The premium SEER2 20+ models (GSX20) offer the best efficiency but have longer payback periods given Minnesota's shorter cooling season.
Pairing with a Goodman Furnace
All Goodman AC units pair seamlessly with Goodman furnaces using a matching evaporator coil (CAUF or CAPF series). When buying a matched system — furnace, evaporator coil, and AC condenser — you ensure compatibility and qualify for Goodman's full system warranty. See our guide on Goodman GSX16 AC review for Minnesota.
Shop Goodman AC Factory-Direct
Browse our full Goodman air conditioner collection at Furnace Direct — same-day Minnesota delivery, no dealer markup. Bundle with a Goodman furnace for a complete matched system. Also see our guide on HVAC tax credits in 2026 — qualifying AC units may be eligible for the federal 25C credit.
Get wholesale pricing on a new system.
Tell us a little about your home and what you're replacing. We'll send real numbers on a Goodman 96% AFUE setup — shipped direct to your door anywhere in the lower 48. No contractor markup, no obligation.